Home > Products > Plastic Sheet Machine >

TS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer plates

TS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer plates

TS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer plates
TS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer platesTS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer platesTS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer platesTS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer platesTS-1100mm PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine making Plastic multi-layer plates
CategoriesPlastic Sheet Machine
BrandHEGU
ModelTS-1100
Update Time2021-05-09
Detail Information
Plastic Sheet Extrusion Line

PP PE ABS HIPS PMMA Plastic Sheet Extrusion Machine

1,Plastic sheet extrusion line is capable of continuously producing mono-layer or multi-layer PVC/PP/PE/ABS/PMMA/PC/PS/HIPS plate and sheet with the width less than 3000mm and thickness of 0.25-30mm . The products are widely used in the fields of refrigerater ,air conditioner ,auto,advertisement ,and construction ,environment protection ,etc.

2, Plastic sheet extrusion line includes many equipments ,such as :extruder ,screen changer and mould,three-roller calendaring machine,bracket of cooling roller,landscape orientation cutting machine and the winder.

Equipment list for HIPS ABS PP PE Sheet making machine/ plastic sheet extrusion machine
Machine list
Quantity
Raw material drying device
one set
Material auto feeding
one set
High output Single screw extruder
two sets
Melt dosing pumps and hydraulic screen changer
two sets
Co-extrusion Mold & Distributor
one set
Three-roller calendaring machine
one set
Cooling bracket
one set
Hauling off device
one set
Cutting device
one set
Stainless steel stacker
one set
Electricity control system
one set
Detailed Images

Extruder for Plastic sheet extrusion machine

Appropriate single-screw extruder (exhaust or not) should be chosen on the basis of different materials. Specially designed screw
and advanced temperature controlling system ensure the good plasticization, high output and stable extruding.

Mold for Plastic sheet extrusion machine

The quick screen changer of hydraulic system ensures the short course of screen changing without material-leakage. Reasonable
structure of mould should be chosen in terms of material, whereas moulds of clothes-rack mode are widely accepted to regulate
flow-distribution and guarantee even thickness of plates (sheets).

Three roller calendaring machine for Plastic sheet extrusion machine

Inclined and vertical three-roller calendaring machine should be chosen according to the thickness of the plates(sheets). Temperature controller operates separately and gap among the three rollers can be adjusted freely, and the central roller has special design of regulating angle. Both ensure the excellent calendaring effect and even thickness of plates (sheets).

Cooling bracket for Plastic sheet extrusion machine

Equipped with corresponding guide roller, the cooling effect is better. In addition, the edge-shearing device equipped can guarantee fixed width of plates (sheets) and quality of edge.

Side cutting for plastic sheet extrusion machine

Side cutting for cutting the width of the Plastic sheet.

Cutting by: high quality alloy knives.

Quantity of Knives: two sets

Cutting edge recycling: with online crushing system

Haul off machine for plastic sheet extrusion machine

Double roller haul off machine

Roller material: rubber

roller up and down: by cylinder control

Speed control: Frequency

Cutting machine for Plastic sheet extrusion machine

It is of length-fixed cutting with cutting precision less than 2mm and adopts alloy blade or rigid alloy saw bit to ensure the good cutting effect and constantly stable performance.

Stacker for Plastic sheet extrusion machine

Stacker width: according to sheet width

Stacker length: 3 meters

Stacker material: stainless steel

Stacker type: automatically

electricity control cabinet for plastic sheet extrusion machine

 Motor: Siemens motor

Inverter: ABB inverter

Temperature control: Omron brand

Contractor: Schneider

PLC control: Siemens brand computer touch screen

Customer Case
Our service
Certifications
Company strength
FAQ
Join hegu wood-plastic to get the news